Specifications:
* Connect the antenna with the receiver
* Plug power jack of DC 9V/12V power supply into the power socket of the receiver (the power indicator is on)
* Connect the output of receiver with monitor with AV wire
* Plug power jack of DC 8V power supply into the power socket of the camera (battery of the same voltage is acceptable)
* Fine tune to the desired position (until the image of wireless camera is received)
* Adjust the lens of the camera to best position
Camera:
* 1/4 SHARP CCD
* System: PAL / CCIR, NTSC / EIA
* Validity Pixel: PAL: 628 x 582, NTSC: 510 x 492
* Picture Area: PAL: 5.78 x 4.19mm, NTSC: 4.69 x 3.45mm
* Horizontal Definition: 420 line
* Scan Frequency: PAL / CCIR: 50Hz, NTSC / EIA: 60Hz
* Sensitivity: +18DB - AGL ON-OFF
* Voltage: DC -12V
* Current: 500mA
* Power Consumption:
